Crossover SPICE simulation and the crossover diagram





What are shown below are original, ideal, and real schematic representations of the crossovers and SPICE analysis results. Diagrams follow these. They are, in order of presentation, real, ideal, and unmodified original.













In these diagram, the layout is correct but the values are not.
The Valencias in my possesion have a single 24uF capacitor instead of 11uF and 10uF in prallel, which equals 21uF. The inductors are 1.5mH instead of 1.75mH. The 8uF capacitor in the horn circuit is correct.
The network provides 0db-20db adjustment range and a 12db roll-off. These, after my modification, became second order Linkwitz-Riley hi-pass/lo-pass filters.








Comments

Post a Comment

Popular posts from this blog

Drive rack, ventilation and wiring.

 My drives have a new rack to hold them. Hot glue and square wood dowels provided the materials with which to build the rack. I used zip ties and a small computer fan attached to the end of the rack to provide cooling air ventilation for the drives. This will increase the lifetime of the drives. Previously the were stacked on top of each other and became noticeably warm during use. The wiring really was bad. Too many cables/wires held together with zip ties. I added a surge protected outlet strip of a newer, more sophisticated design. I rearranged the system wiring to minimize the number of outlet strips and the disarrayed wires. Two strips were screwed to the wall. One was removed. The circular strip was moved from the entertainment center to a work table beside the other two strips and combined with them to supply all devices attached to the system. The strip removed replaced the circular strip in the entertainment system.  Overall, the current setup works better. Both syste...
Read more

Philips Hue lights Updated

 Philips Hue lights are known for the ability to program brightness, saturation, and hue using software. Most people use one or more cellphone apps to control their Hue lights. I've a history in computrer science and electronic technology and engineering, so took this up as a new interest. WiFi control of light bulbs' colors has interested me ever since I read aboout the topic some years ago. There happened to be seven Hue bulbs available from one eBay seller and for a reaosnable fee, approximately $20. A bridge device is used to communicate with the bulbs, so I waited for a good deal on eBay and got one. Philips has evolved a developer community and resources for those who want to explore the possibilities in lamp light control. The user joins the communnity and gets a temporary API key, formerly referred to as a 'username', good for one session. Then a browser or app, can be used to send commands to the bulbs. There are other avenues of communication. Python libraries...
Read more

Jellyfin media server

 The owner of Emby has blocked my using the WebOS access method of using Emby. I discovered the method and posted on the product's forum. That software is no longer my media server and has been removed from my computers. I replaced Emby with Jellyfin. Jellyfin is the evolved Emby open sourced. Emby was originally open source (and free) but was privatized and monetized by the creator. Many considered that move unethical.  The last open source version became the basis for Jellyfin,  easily competitive with Emby and almost, if not equally, well known. I've been using Jellyfin for about a year, perhaps more. The software has issues but is in constant development but is very useful in the current state, version 10.8.5.
Read more